Introduction:

• SP-RLC AC single/three-phase resistive-inductive-capacitive load bank, the power inputadopts segmented combination control, unified segmented power input, resistive, inductive,and capacitive loads can be used in any combination, and supports sudden addition/unloading . The resistive load adopts energy-consuming working mode and forced air-cooling heat dissipation, which greatly ensures the reliability of constant power discharge. The new power -consuming components are produced with independent intellectual property rights, withhigh power density and no red heat phenomenon; automatic overheating protection function,In the unexpected situation where the fan does not rotate, overheating and burnout will not occur. It is safe and has a long life. The inductive load reactor uses high-silicon and high quality oriented silicon steel sheets.
  
  
• All insulating materials and electromagnetic wires are grade F/H; manufactured in accordance with national standards, they have low loss, high insulation strength, good heat dissipation, anti-corrosion, moisture-proof, strong earthquake resistance, safety andreliability; capacitive load capacitors adopt GB/T3667 -The standard CBB capacitor certifiedin 2005 has small size, light weight, good electrical performance, low loss, good self-healingcharacteristics, and an internal pressure explosion-proof device. It is safe to use and can meet the requirements of long-term loading test process. The capacitive reactance will not be changes occur. It meets the full load testing needs of photovoltaic inverters, householdstorage inverters, outdoor mobile energy storage power supplies, etc. It is an essential testing tool for production workshops, laboratories, installation and debugging, andscientific research and development.
  

Features:

1. The fan adopts a small axial flow fan, which has the characteristics of large air volume, good heat dissipation and low noise; 
   
2. It has automatic alarm protection function for temperature overheating: when overheating occurs due to special reasons, the load can be automatically cut off to ensure safe use; 
   
3. The fan starts automatically when the load is loaded and stops automatically after the load is unloaded; Independently developed new power consumption alloy resistor, with high power density, no red heat phenomenon and longservice life; 
   
4. Communication interface: Ethernet, (reserved 485 interface, following modbus-RTU: for users to develop their own software); 
   
5. The software can set the power value to be loaded, automatically calculate and load the required power level; Can carry out ON/OFF stress test, perform data recording and fault query in real time; 
   
6. AC three-phase resistive-inductive load (RLC with G including island test function) meets 31 items of IEC62116-2008 test standards.
   

Specification:

Remarks: Special specifications can be customized according to customer requirements (Rated voltage, Rated power, Power supply voltage, box size etc).

Other similar products: