Introduction:

• SP-RL/RC AC single/three-phase resistance-inductance/resistance-capacitance load bank, the power input adopts segmented combinationcontrol, unified segmented power input, supports sudden addition/unloading, and the resistive load adopts energy-consuming workingmode , forced air-cooling heat dissipation, which greatly ensures the reliability of constant power discharge. The new power consumption components are produced with independent intellectual property rights, with high power density and no red heat phenomenon; the automatic overheating protection function can also protect the fan under unexpected circumstances when the fan does not rotate. It will not overheat or burn out, and is safe and has a long life; the inductive load reactor is made of high-silicon and high-quality oriented silicon steel sheets; all insulating materials and electromagnetic wires are of F/H grade; manufactured in accordance with national standards, it has low loss and insulation High strength, good heat dissipation, anti-corrosion, moisture-proof, strong earthquake resistance, safe andreliable. The capacitive load capacitor adopts the standard CBB capacitor certified by GB/T3667-2005. It has small size, light weight, goodelectrical performance, low loss, and good self-healing characteristics. There is a pressure explosion-proof device inside to meet the long term loading test process. The capacitive reactance of the capacitor does not change.    
  

• The whole machine adopts a modular design, which is simple to operate and maintain. It can measure voltage, current and other parameters according to customer requirements, providing a scientific detection method for high-power AC power equipment and meetingthe full load detection of inverters, UPS power supplies, generator sets, etc. It is a necessary testing tool for production workshops, laboratories, installation and debugging, and scientific research and development.
  

Features:

1. The fan adopts a small axial flow fan, which has the characteristics of large air volume, good heat dissipation and low noise; 
   
2. It has an automatic alarm protection function for temperature overheating: when overheating occurs due to special reasons, the load can be automatically cut off to ensure safe use; the fan starts automatically when the load is loaded, and the fan delays and stopsautomatically after unloading; 
   
3. Independently developed new power consumption alloy resistor, with high power density, no red heat phenomenon and long service life; 
   
4. Communication interface: Ethernet, (reserved 485 interface, following modbus-RTU: for users to develop their own software); 
   
5. The software can set the power value to be loaded, automatically calculate and load the required power level, conduct ON/OFF stresstesting, and conduct real-time data recording and fault inquiry.
   

Specification:

Remarks: Special specifications can be customized according to customer requirements (Rated voltage, Rated power, Power supply voltage, box size etc).

Other similar products:

 Notes: Other power can be customized according to requirement.